ماژول سیسکو یک سریال WIC-1T

نقد و بررسی ماژول سیسکو یک سریال WIC-1T

ماژول سیسکو یک سریال Cisco WIC-1T

Cisco module Configuration
This section provides a sample configuration for the WIC-1T interface card
Note: There are no framing, clocking, or linecode parameters or commands being used here. The WIC-1T interface card does not have an integrated CSU/DSU. You need to use an external CSU/DSU
Configure the serial interface just as you would any other serial interface. For example
maui-soho-01(config)#interface Serial 0
maui-soho-01(config-if)#ip add 10.0.0.1 255.255.255.0
maui-soho-01(config-if)#encapsulation ppp
maui-soho-01(config-if)#no shutdown